如何让CSDN博客里面的代码看起来更美观漂亮

不要切换到MarkDown编辑器，直接选择

插入代码，选择编程语言类型。当然如果有人有强迫症要用Markdown的就无话可说了

void CClearDtc::ClearCode(const CString &strEcu)
{
	adsMessageBox(STD_TEXT_INFORMATION, STD_TEXT_COMMING, DF_MB_NOBUTTON);
	CBinary	binEcu = SetBinary(CB_ReadDtc, HexStrToBinary(strEcu), 4);
	CString strFilePath;
	strFilePath = "\\EcuFiles\\" + strEcu + ".ods";
	CDataSheet openFile;
	openFile.Open(strFilePath);
	openFile.SetKey(binEcu);
	CString strEraserCmd = openFile.GetValue(STR_Menu, STR_EraserCmd);

	if (strEraserCmd.IsEmpty())
	{
		adsMessageBox(STD_TEXT_INFORMATION, STD_TEXT_FUNC_NOT_SUPPORT, DF_MB_OK);
		return;

	}

	D_I32 iRet = adsMessageBox(STD_MENU_CLEAR_DTC, STD_TEXT_CONFIRMING, DF_MB_YESNO);
	if (DF_IDNO == iRet)
	{
		return;
	}

	iRet = adsMessageBox(STD_MENU_CLEAR_DTC, STD_TEXT_CLEAR_DTC, DF_MB_YESNO);
	if (DF_IDNO == iRet)
	{
		return;
	}


	CBinary binEraserCmd, binRequest, binResponse, binRecv;
	CString strRequest, strReqDelay, strResponse;


	//清码命令可能有多条
	CGroup<CString>vctEraserCmd;
	Split(vctEraserCmd, strEraserCmd, "#");
	for (D_I16 iCmd = 0; iCmd < vctEraserCmd.GetSize(); iCmd++)
	{
		binEraserCmd = SetBinary(binEcu, StrHextoBinary(vctEraserCmd[iCmd]), 1);
		openFile.SetKey(binEraserCmd);
		strRequest = openFile.GetValue(STR_Req, STR_Request);
		binRequest = HexStrToBinary(strRequest);
		strReqDelay = openFile.GetValue(STR_Req, STR_ReqDelay);
		strResponse = openFile.GetValue(STR_Rsp, STR_Response);
		binResponse = HexStrToBinary(strResponse);
		binRecv = SendCmd(binRequest);
		if (!strReqDelay.IsEmpty())
		{
			Delay(StrToInt(strReqDelay));
		}
	}

	adsMessageBox(STD_MENU_CLEAR_DTC, STD_TEXT_CLEARING_DTC, DF_MB_NOBUTTON);

	if (binRecv.IsEmpty())//只要有收到命令即可清码，不需要SID位+0x40
	{
		adsMessageBox(STD_MENU_CLEAR_DTC, STD_TEXT_COMM_FAIL, DF_MB_OK);
	}
	else
	{
		adsMessageBox(STD_MENU_CLEAR_DTC, STD_TEXT_SUCCESS, DF_MB_OK);
	}
}

欢迎到深圳程序员交流群交流：550846167