CentOS7升级Node.jsV22.11.0

Lin448
80 阅读3分钟

CentOS7安装nodejs v18以上版本如果出现以下错误，则需要升级gcc、glibc：

node: /lib64/libm.so.6: version `GLIBC_2.27' not found (required by node) 
node: /lib64/libc.so.6: version `GLIBC_2.28' not found (required by node) 
node: /lib64/libc.so.6: version `GLIBC_2.25' not found (required by node)

使用strings命令查看当前glibc支持的版本：

strings /lib64/libc.so.6 | grep -E "^GLIBC_" | sort -V -r | uniq 
GLIBC_PRIVATE 
GLIBC_2.17 
GLIBC_2.16 
GLIBC_2.15 
... 
... 
GLIBC_2.2.5

先更新：

yum update

如果出现以下报错，则需要先解决，否则跳过

Loaded plugins: fastestmirror
Determining fastest mirrors
Could not retrieve mirrorlist http://mirrorlist.centos.org?arch=x86_64&release=7&repo=sclo-rh error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"
...
Cannot find a valid baseurl for repo: centos-sclo-rh/x86_64

解决yum更新问题

以上错误表明系统无法为名为 "centos-sclo-rh" 的软件集合仓库找到有效的基础URL，原因是Centos7版本已经于2024/6/30结束了官方支持。解决办法：

  1. 备份文件 
    cd /etc/yum.repos.d/
mv CentOS-SCLo-scl.repo CentOS-SCLo-scl.repo.bak
mv CentOS-SCLo-scl-rh.repo CentOS-SCLo-scl-rh.repo.bak
  2. 更新CentOS-SCLo-rh.repo文件 
    vi CentOS-SCLo-rh.repo
    内容如下： 
    [centos-sclo-rh]
name=CentOS-7 - SCLo rh
baseurl=https://mirrors.aliyun.com/centos/7/sclo/x86_64/rh/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-SCLo
  3. 更新CentOS-Base.repo文件： 
    vi CentOS-Base.repo
    替换为以下内容： 
    [base]
name=CentOS-$releasever - Base - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/os/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/os/$basearch/
        http://mirrors.cloud.aliyuncs.com/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7

#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/extras/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/extras/$basearch/
        http://mirrors.cloud.aliyuncs.com/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7

#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/centosplus/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/centosplus/$basearch/
        http://mirrors.cloud.aliyuncs.com/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7

#contrib - packages by Centos Users
[contrib]
name=CentOS-$releasever - Contrib - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/contrib/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/contrib/$basearch/
        http://mirrors.cloud.aliyuncs.com/centos/$releasever/contrib/$basearch/
gpgcheck=1
enabled=0
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
  4. 更新RPM-GPG-KEY-CentOS-SIG-SCLo： 
    mv /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-SCLo /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-SCLo.bak
vi /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-SCLo
    粘贴以下内容： 
    -----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v2.0.22 (GNU/Linux)
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=+Gr2
-----END PGP PUBLIC KEY BLOCK-----
  5. 再执行以下命令即可： 
    yum-config-manager --enable centos-sclo-rh
yum-config-manager --enable centos-sclo-sclo
yum clean all
yum makecache

升级make版本至4.2

查看当前make版本：

make -v
GNU Make 3.82

执行以下命令：

cd /home
wget http://ftp.gnu.org/gnu/make/make-4.2.tar.gz
tar -xzvf make-4.2.tar.gz
cd make-4.2
sudo ./configure
sudo make
sudo make install
sudo rm -rf /usr/bin/make
sudo cp ./make /usr/bin/
make -v

成功的话，将输出以下内容：

GNU Make 4.2

升级gcc版本至8.3.1

查看当前gcc版本：

gcc -v
...gcc version 4.8.5 20150623 (Red Hat 4.8.5-44) (GCC)

执行以下命令：

yum -y install centos-release-scl
yum -y install devtoolset-8-gcc devtoolset-8-gcc-c++ devtoolset-8-binutils
scl enable devtoolset-8 bash
source /opt/rh/devtoolset-8/enable
echo "source /opt/rh/devtoolset-8/enable" >>/etc/profile
gcc -v

输出以下内容表明升级成功：

gcc version 8.3.1 20190311 (Red Hat 8.3.1-3) (GCC)

升级GLIBC_2.28

执行以下命令：

cd /home
yum -y install bison
wget  https://mirror.bjtu.edu.cn/gnu/libc/glibc-2.28.tar.xz
tar -xf glibc-2.28.tar.xz -C /usr/local/
cd /usr/local/glibc-2.28/

修改test-installation.pl文件：

cd scripts
vi test-installation.pl

在文件的128行新增： $name ne "nss_test2"

// 源码
    if ($name ne "nss_ldap" && $name ne "db1"
        && $name ne "thread_db"
        && $name ne "nss_test1" && $name ne "libgcc_s") {
    $link_libs .= " -l$name";
    $versions{$name} = $version;
}
// 修改为：
    if ($name ne "nss_ldap" && $name ne "db1"
        && $name ne "thread_db"
        && $name ne "nss_test1" && $name ne "nss_test2" && $name ne "libgcc_s") {
      $link_libs .= " -l$name";
      $versions{$name} = $version;
}

保存，再执行以下命令：

cd /usr/local/glibc-2.28/
mkdir build
cd build/
../configure --prefix=/usr --disable-profile --enable-add-ons --with-headers=/usr/include --with-binutils=/usr/bin --enable-obsolete-nsl
make -j 10
make localedata/install-locales -j 10
make install -j 10

将gcc最新版本的动态库替换系统中老版本的动态库：

yum whatprovides libstdc++.so.6
yum update -y libstdc++.x86_64
cd /home
wget http://www.vuln.cn/wp-content/uploads/2019/08/libstdc.so_.6.0.26.zip
unzip libstdc.so_.6.0.26.zip
cp libstdc++.so.6.0.26 /lib64/
cd /lib64
cp libstdc++.so.6 libstdc++.so.6.bak
rm -f libstdc++.so.6
ln -s libstdc++.so.6.0.26 libstdc++.so.6

查看node版本：

node -v
v22.11.0
avatar
文章
阅读
粉丝