ACST2001 S2 2024 Spreadsheet Project Task 

ACST2001 S2 2024 Spreadsheet Project Task 
In a spreadsheet, create four separate sheets, labelled ‘Part a’, ‘Part b’, ‘Part c’ and ‘Part 
d’. Part a to c conffrm some of the results presented to you in week 7, on slide 40-42. 
Then answer the following questions 
a. On your sheet labelled ‘Part a’ do the following. 

Assume each bond has a face value of $100.    Firstly, you are required to price a number of bonds (30 in all). We start by  considering a 4decimal places) at yields to maturity of …, 20  Next consider a 103 decimal places) at yields to maturity of …, 20  Finally, consider a 22(in 3 decimal places) at yields to maturity of , …, 20p.a.    The table below is the recommended format for the 30 bond prices, one value is  given as a check value.    Yield to Maturity      b. On your sheet labelled ‘Part b’ do the following.    Produce one graph of the prices (vertical axis) against yields (horizontal axis) you  calculated above for the three different bonds in part a – that is, all three bond  results should 代 写ACST2001 S2 2024 Spreadsheet Project Task  be plotted in the one graph. Price should be the vertical axis of  your graph. Label the three curves you have plotted as ‘4coupon’, and ‘22  c. On your sheet labelled ‘Part c’ do the following.    Consider the move in yield from   0 = 8approximate formula for modified duration, calculate the (approximate) duration  (in years) of each of the three Treasury bonds maturing in 8 years we worked with  above (one with 4  Next, consider the move in yield from   0 = 16above, calculate the (approximate) duration (in years) of each of the three  Treasury bonds maturing in 8 years we worked with above (one with 4one with 10  The approximate formula for modified duration, shown in the week 8 lecture  notes on slide 31. You are not required to calculate the exact duration, but you  need to calculate the approximate duration.    The table below is the recommended format, you can add more columns if  necessary.   8-year  Treasury Bond   0   1  Approximate  Modified Duration  Approximate  Duration  4102241022     You should also conduct a reasonable check in your documentation.    · If Duration of a coupon paying bond should always be less than the term of the  bond. Are your answers consistent with this statement?  · Compare the Duration of the low coupon bonds to the Duration of higher  coupon bonds. Which bonds have a longer duration? Is this what you expected?  · Compare the Duration of the bonds at low yields to the Duration of the same  bonds at higher yields. When is the Duration longer, at low yields or high yields?  Is this what you expected?     d. On your sheet labelled ‘Part d’ do the following    You need to model the net bond price of a 15 September 2030 Treasury bond  with a coupon rate   2 = 5$100 that matures at par, the 
yield to maturity is   2 = 6%. You should account for a 30% tax on interest and 
capital gain, assuming the tax on interest is deferred 6 months, and tax on 
capital gain is deferred 12 months. 

You are required to create a bond price model that can calculate the net bond 
price from 16 March 2024 to 15 September 2024. Your marker would input these 
dates in cell B1 (you can start with any dates from 16 March 2024 to 15 
September 2024 in cell B1), you are required to determine the net bond price in 
cell E1. You can use any Excel cells in ‘part d’ to aid you to calculate your final 
answer in cell E1. 

You will be awarded with 1 bonus mark if your model can correctly determine the 
net bond price after 15 September 2024. More information about the bonus mark 
can be found at the end of document. 

The deadline for Spreadsheet Project Task (group part) is 1 October 2024, 11:55 PM. 
Present your answers to the above questions in a functional Excel spreadsheet (it 
should be .xlsx or .xls file), give each solution on a separate sheet (labelled Part a, Part 
b, Part c and Part d). Your first page (part a) should also give the name and student id 
number of each person in the group. Your spreadsheet should be clearly labelled and 
easy to understand. Make sure you identify what the inputs and outputs are for each 
worksheet. (You can check week 2 – week 5 practical solution and follow the format for 
input and output). You need to include the necessary information, e.g., title, axis title, 
etc., in your plot. You need to document and describe your working steps. Note that 
uploading a file can take up to 10 or 15 minutes. You need to submit your file at least 20 
minutes before the deadline to ensure a successful submission. 

Marking break down 

1. Formatting and documentation for Part a-d [3 marks] 
2. Part a [3 marks] 
3. Part b [3 marks] 
4. Part c [3 marks] 
5. Part d [3 marks + 1 bonus mark] 
   The maximum mark you can receive for this group project task is 15/15. If you get 14 
   marks + 1 bonus mark your final mark would be 15/15. If you get 15 marks + 1 bonus 
   mark your final mark would be 15/15. 
   \ 
   WX：codinghelp