[New iPhone real-life iMessage sending software]
By setting the overrideUserInterfaceStyle property, the view and its subviews have a specific UIUserInterfaceStyle. But if you want to get the future UIUserInterfaceStyle, you need to use traitCollection.userInterfaceStyle instead. Use the overrideUserInterfaceStyle property on UIViewController whenever possible. Use this property only at the following times: (1) Partially use a specific pattern on a single view or view hierarchical layout. (2) You want to use a specific style on all UIWindow and its view controllers and modal pop-up ViewControllers, and do not want to force the entire application to change the style. (If you absolutely want the entire application to have a certain style, don't use it and instead set the UIUserInterfaceStyle key in Info.plist.)
Recommended content IMESSGAE related
| Recommended content by the author ✈️@IMEAE | [iMessage Apple recommended software] *** Click to view the content information requested by the author |
|---|---|
| Recommended content by the author ✈️@IMEAE | [1. Family promotion, photo album promotion, calendar promotion content] *** Click to view the content information requested by the author |
| Recommended content by the author ✈️@IMEAE | [2.iMessagePush on behalf]*** Click to view the content information requested by the author |
| Recommended content by the author ✈️@IMEAE | [3.iMessage push system] *** Click to view the content information requested by the author |
| Recommended content by the author ✈️@IMEAE | [4.IM group messaging protocol push] *** Click to view the content information requested by the author |
| Recommended content by the author ✈️@IMEAE | [5.iMessage push device] *** Click to view the content information requested by the author |
When set on a normal UIView: This property affects only the characteristics of this view and its subviews. It does not affect any view controller or other view controller's subviews. When setting on UIWindow: This property affects the rootViewController and thus the entire view controller and view hierarchy. It will also affect the interface that comes out of the window modal. Therefore, it can be seen that overrideUserInterfaceStyle will not only affect itself, but also affect its own subviews. Changing to a window will affect all views and view controllers in the entire window, including the view controller that modally jumps into. Moreover, the document also emphasizes that you can set the entire application to use a certain style. The specific method can be through code, or you can configure the key User Interface Style through info.plist, and the corresponding Value is Light/Dark. if #available(iOS 13.0, *) { window?.overrideUserInterfaceStyle = .light;
On the Message Account pop-up, tap “Sign Out.”
cd "C:\Program Files\Oracle\VirtualBox"
VBoxManage.exe modifyvm "MacOS 10.12" --cpuidset 00000001 000106e5 00100800 0098e3fd bfebfbff
VBoxManage setextradata "MacOS 10.12" "VBoxInternal/Devices/efi/0/Config/DmiSystemProduct" "iMac11,3"
VBoxManage setextradata "MacOS 10.12" "VBoxInternal/Devices/efi/0/Config/DmiSystemVersion" "1.0"
VBoxManage setextradata "MacOS 10.12" "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "Iloveapple"
VBoxManage setextradata "MacOS 10.12" "VBoxInternal/Devices/smc/0/Config/DeviceKey" "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc"
VBoxManage setextradata "MacOS 10.12" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 1
In the "Message Account" pop-up window, click "Leave."
After a moment, you’ll be signed out of iMessage. Repeat this process on all the devices you use that account for with iMessage before continuing.
After a while, you will exit iMessage. Before continuing to take control of the account, please repeat this process on all devices used for the account.
After signing out on all your devices, tap “Use your Apple ID for iMessage” on this same page to sign back in.
After logging out on all devices, click "Use Apple ID for iMessage" on the same page to re-register
Enter your Apple ID and password, and then tap “Sign In.”
Enter your Apple ID and password, then click "Sign In".
On the Accessibility settings screen, see whether the “Reduce Motion” item is turned on or off. If it’s turned on, go ahead and tap “Reduce Motion.”
The next step is to add the interface, and the dial-up command also provides more practical combination and transmission functions. If necessary, you can also select one or more groups to be buried at the same time. 5. In the last step, you can write the content of your text message with confidence; PS: Special reminder: 1. The dialer guide can automatically filter - the desired wireless phone number, so no need to worry it will be sent to a stable phone number. 2. Recommendation: Each group of optimal application group transmission settings can control dozens of people without exceeding the upper or lower limit of the operator. This is the only problem with the iPhone SMS group and the only AppStore software and hardware behind the automatic sending of SMS. ! vim ~/ .zshrc //Delete the configuration file ZSH_THEME="random" //Set the topic to personal freedom, move to the topic you like, write down the name and create the theme source ~/ .zshrc //Instantly Effective characteristics: 1. When issued, specify the automatic transmission on the other hand; (1) Some mobile phone service operators limit the number of people who can send text messages; (2) When mobile phone service operators send text messages in a group, without a liaison officer, everyone All will be recognized as transmission success, but some people have accepted it. (3) Some operators sometimes ignore the potential of users, and the tenants who receive text messages will know which person you are sending. For example, on Valentine's Day, if you send two girlfriends, they will also know each other, and you will also send it to each person. A girlfriend's whole body and function will be very important
On the Helper Function Settings screen, check whether the Reduce Activity item is on or off. If it's already turned on, continue and click "Reduce Activity."
Turn the “Reduce Motion” toggle off.
Turn off the "Descent Activity" switch.
Now, can go test your messages again to see if effects are working. Like we said, this seems to be working for some people, but not others. So far, all the instances we've seen on our own devices were corrected by either turning Reduce Motion off or signing out and back into iMessages on your devices. So, hopefully, this will get you fixed up and sending invisible messages in no time.
Now, you can retest your message to see if the results are normal. Like I said, this seems to work for a few people, but not others. So far, all the routines we've been consistent with on our own devices can be corrected by turning off "Resume Activity" or logging out and logging back into iMessages on the device. So, hopefully this will enable you to immediately address the outpouring of unsolicited messages. VBoxManage modifyvm "Mac OS virtual machine name" --cpuidset 00000001 000106e5 00100800 0098e3fd bfebfbff
VBoxManage setextradata "Mac OS virtual machine name" "VBoxInternal/Devices/efi/0/Config/DmiSystemProduct" "iMac11,3" #include <glad/glad.h> // glad must be added before GLFW
#include <GLFW/glfw3.h>
#include
const unsigned int SCR_WIDTH = 800;
const unsigned int SCR_HEIGHT = 600;
# Recommended content IMESSGAE related
| Recommended content by the author ✈️@IMEAE | [iMessage Apple recommended software] *** Click to view the content information requested by the author |
|---|---|
| Recommended content by the author ✈️@IMEAE | [1. Family promotion, photo album promotion, calendar promotion content] *** Click to view the content information requested by the author |
| Recommended content by the author ✈️@IMEAE | [2.iMessagePush on behalf]*** Click to view the content information requested by the author |
| Recommended content by the author ✈️@IMEAE | [3.iMessage push system] *** Click to view the content information requested by the author |
| Recommended content by the author ✈️@IMEAE | [4.IM group messaging protocol push] *** Click to view the content information requested by the author |
| Recommended content by the author ✈️@IMEAE | [5.iMessage push device] *** Click to view the content information requested by the author |
Dynamic distribution security In addition to Person, other paradigms can also implement Greetable, such as Cat:
struct Cat: Greetable { let name: String func greet() { print("meow~ (name)") } } Now, we can use the protocol as a standard type to dynamically dispatch method calls:
let array: [Greetable] = [ Person(name: "Wei Wang"), Cat(name: "onevcat")] for obj in array { obj.greet() } // Hello Wei Wang // meow~ onevcat For types that do not implement Greetbale, the compiler will return an error, so there is no chance of messages being sent by mistake:
struct Bug: Greetable { let name: String }
// Compiler Error: // 'Bug' does not conform to protocol 'Greetable' // protocol requires function 'greet()' In this way, the issue of dynamic dispatch security is solved. If you stay within the confines of Swift, all your code is safe.
✅ Dynamic distribution security cross-cutting concerns diamond fallacy crosscutting concerns Using protocols and protocol extensions we can share code very well. Returning to the myMethod method in the previous section, let's see how to use protocols to do it. First, we can define a protocol containing myMethod:
protocol P { func myMethod() } Note that this protocol does not provide any implementation. We still need to provide a concrete implementation for the actual type when it conforms to this protocol:
// class ViewController: UIViewController extension ViewController: P { func myMethod() { doWork() } }
// class AnotherViewController: UITableViewController extension AnotherViewController: P { func myMethod() { doWork() } } You may be wondering, how does this differ from the Copy & Paste approach? Yes, the answer is -- no difference. But don’t be impatient, we have other technologies that can solve this problem, and that is protocol extensions. The protocol itself is not very powerful, it is just a compiler guarantee for dynamically typed language, and there are similar concepts in many static languages. So what exactly makes Swift a protocol-first language? What really changed the protocol and attracted so much attention was that Apple introduced a new feature to the protocol at WWDC 2015 and when Swift 2 was released.
