限制一个服务器角色数量
CharactersPerRealm
Description: Limit number of characters per account on this realm.
Range: 1-10
Default: 10 - (Client limitation)
CharactersPerRealm = 10
限制一个服务器死亡骑士数量
DeathKnightsPerRealm
Description: Limit number of death knight characters per account on this realm.
Range: 1-10
Default: 1
DeathKnightsPerRealm = 1
死亡骑士最低等级
CharacterCreating.MinLevelForDeathKnight
Description: Limit creating death knights only for account with another
character of specific level (ignored for GM accounts).
Default: 55 - (Enabled, Requires at least another level 55 character)
0 - (Disabled)
1 - (Enabled, Requires at least another level 1 character)
CharacterCreating.MinLevelForDeathKnight = 55
跳过动画
SkipCinematics
Description: Disable cinematic intro at first login after character creation.
Prevents buggy intros in case of custom start location coordinates.
Default: 0 - (Show intro for each new character)
1 - (Show intro only for first character of selected race)
2 - (Disable intro for all classes)
SkipCinematics = 0
最高角色等级
MaxPlayerLevel
Description: Maximum level that can be reached by players.
Important: Levels beyond 100 are not recommended at all.
Range: 1-255
Default: 80
MaxPlayerLevel = 80
MinDualSpecLevel
Description: Level requirement for Dual Talent Specialization.
Default: 40
MinDualSpecLevel = 40
初始等级
StartPlayerLevel
Description: Starting level for characters after creation.
Range: 1-MaxPlayerLevel
Default: 1
StartPlayerLevel = 1
死亡骑士初始等级
StartDeathKnightPlayerLevel
Description: Starting level for death knight characters after creation.
Range: 1-MaxPlayerLevel
Default: 55
StartDeathKnightPlayerLevel = 55
橘色初始钱数
StartPlayerMoney
Description: Amount of money (in Copper) that a character has after creation.
Default: 0
100 - (1 Silver)
10000 - (1 Gold)
StartPlayerMoney = 1000000
最高荣誉点数
MaxHonorPoints
Description: Maximum honor points a character can have.
Default: 75000
MaxHonorPoints = 75000
初始荣誉点数
StartHonorPoints
Description: Amount of honor points that characters have after creation.
Default: 0
StartHonorPoints = 0
最高竞技场点数
MaxArenaPoints
Description: Maximum arena points a character can have.
Default: 10000
MaxArenaPoints = 10000
初始竞技场点数
StartArenaPoints
Description: Amount of arena points that characters has after creation.
Default: 0
StartArenaPoints = 0
招募朋友最高等级
RecruitAFriend.MaxLevel
Description: Highest level up to which a character can benefit from the Recruit-A-Friend
experience multiplier.
Default: 60
RecruitAFriend.MaxLevel = 60
招募等级最大差
RecruitAFriend.MaxDifference
Description: Highest level difference between linked Recruiter and Friend benefit from
the Recruit-A-Friend experience multiplier.
Default: 4
RecruitAFriend.MaxDifference = 4
水下呼吸角色等级
DisableWaterBreath
Description: Required security level for water breathing.
Default: 4 - (Disabled)
0 - (Enabled, Everyone)
1 - (Enabled, Mods/GMs/Admins)
2 - (Enabled, GMs/Admins)
3 - (Enabled, Admins)
DisableWaterBreath = 4
角色创建后开启所有飞行点
AllFlightPaths
Description: Character knows all flight paths (of both factions) after creation.
Default: 0 - (Disabled)
1 - (Enabled)
AllFlightPaths = 0
飞行时直接抵达目的地
InstantFlightPaths
Description: Flight paths will take players to their destination instantly instead
of making them wait while flying.
Default: 0 - (Disabled)
1 - (Enabled)
InstantFlightPaths = 0
技能等级跟着等级自动提升
AlwaysMaxSkillForLevel
Description: Players will automatically gain max skill level when logging in or leveling
up.
Default: 0 - (Disabled)
1 - (Enabled)
AlwaysMaxSkillForLevel = 0
激活天气系统
ActivateWeather
Description: Activate the weather system.
Default: 1 - (Enabled)
0 - (Disabled)
ActivateWeather = 1
CastUnstuck
Description: Allow casting the Unstuck spell using .start or unstuck button in client
help options.
Default: 1 - (Enabled)
0 - (Disabled)
CastUnstuck = 1
Instance.IgnoreLevel
Description: Ignore level requirement when entering instances.
Default: 0 - (Disabled)
1 - (Enabled)
Instance.IgnoreLevel = 1
Instance.IgnoreRaid
Description: Ignore raid group requirement when entering instances.
Default: 0 - (Disabled)
1 - (Enabled)
Instance.IgnoreRaid = 1
Instance.ResetTimeHour
Description: Hour of the day when the global instance reset occurs.
Range: 0-23
Default: 4 - (04:00 AM)
Instance.ResetTimeHour = 4
Instance.UnloadDelay
Description: Time (in milliseconds) before instance maps are unloaded from memory if no
characters are inside.
Default: 1800000 - (Enabled, 30 minutes)
0 - (Disabled, Instance maps are kept in memory until the instance
resets)
Instance.UnloadDelay = 1800000
InstancesResetAnnounce
Description: Announce the reset of one instance to whole party.
Default: false - (Disabled, don't show, blizzlike)
true - (Enabled, show)
InstancesResetAnnounce = false
Quests.EnableQuestTracker
Description: Store datas in the database about quest completion and abandonment to help finding out bugged quests.
Default: 0 - (Disabled)
1 - (Enabled)
Quests.EnableQuestTracker = 0
Quests.LowLevelHideDiff
Description: Level difference between player and quest level at which quests are
considered low-level and are not shown via exclamation mark (!) at quest
givers.
Default: 4 - (Enabled, Hide quests that have 4 levels less than the character)
-1 - (Disabled, Show all available quest marks)
Quests.LowLevelHideDiff = 4
Quests.HighLevelHideDiff
Description: Level difference between player and quest level at which quests are
considered high-level and are not shown via exclamation mark (!) at quest
givers.
Default: 7 - (Enabled, Hide quests that have 7 levels more than the character)
-1 - (Disabled, Show all available quest marks)
Quests.HighLevelHideDiff = 7
Quests.IgnoreRaid
Description: Allow non-raid quests to be completed while in a raid group.
Default: 0 - (Disabled)
1 - (Enabled)
Quests.IgnoreRaid = 0
Quests.IgnoreAutoAccept
Description: Ignore auto accept flag. Clients will have to manually accept all quests.
Default: 0 - (Disabled, DB values determine if quest is marked auto accept or not.)
1 - (Enabled, clients will not be told to automatically accept any quest.)
Quests.IgnoreAutoAccept = 0
Quests.IgnoreAutoComplete
Description: Ignore auto complete flag. Clients will have to manually complete all quests.
Default: 0 - (Disabled, DB values determine if quest is marked auto complete or not.)
1 - (Enabled, clients will not be told to automatically complete any quest.)
Quests.IgnoreAutoComplete = 0
Quests.DailyResetTime
Description: Hour of the day when daily quest reset occurs.
Range: 0-23
Default: 3 - (3:00 AM, Blizzlike)
Quests.DailyResetTime = 3
Guild.EventLogRecordsCount
Description: Number of log entries for guild events that are stored per guild. Old entries
will be overwritten if the number of log entries exceed the configured value.
High numbers prevent this behavior but may have performance impacts.
Default: 100
Guild.EventLogRecordsCount = 100
Guild.ResetHour
Description: Hour of the day when the daily cap resets occur.
Range: 0-23
Default: 6 - (06:00 AM)
Guild.ResetHour = 6
Guild.BankEventLogRecordsCount
Description: Number of log entries for guild bank events that are stored per guild. Old
entries will be overwritten if the number of log entries exceed the
configured value. High numbers prevent this behavior but may have performance
impacts.
Default: 25 - (Minimum)
Guild.BankEventLogRecordsCount = 25
MaxPrimaryTradeSkill
Description: Maximum number of primary professions a character can learn.
Range: 0-11
Default: 2
MaxPrimaryTradeSkill = 2
MinPetitionSigns
Description: Number of required signatures on charters to create a guild.
Range: 0-9
Default: 9
MinPetitionSigns = 9
MaxGroupXPDistance
Description: Max distance to creature for group member to get experience at creature
death.
Default: 74
MaxGroupXPDistance = 74
MaxRecruitAFriendBonusDistance
Description: Max distance between character and and group to gain the Recruit-A-Friend
XP multiplier.
Default: 100
MaxRecruitAFriendBonusDistance = 100
MinQuestScaledXPRatio
Description: Min ratio of experience that a quest can grant when player level scaling is factored.
Example: 50 (No less than 50% experience granted from a lower leveled quests completion)
100 (Quests always grant full experience upon completion)
Default: 0 - (Quests too low may grant no experience)
MinQuestScaledXPRatio = 0
MinCreatureScaledXPRatio
Description: Min ratio of experience that a creature kill can grant when player level scaling is factored. This
will also allow spell procs to trigger, such as Drain Soul, if > 0 and exp is grantable.
Example: 50 (No less than 50% experience granted from a lower leveled creature kill)
100 (Creature kills always grant full experience upon kill)
Default: 0 - (Creatures too low may grant no experience)
MinCreatureScaledXPRatio = 0
MinDiscoveredScaledXPRatio
Description: Min ratio of experience that an area discovery event will grant when player level scaling is factored.
Example: 50 (No less than 50% experience granted from discovering a new section of map)
100 (Map exploration always grant full experience upon discovery)
Default: 0 - (No experience granted when discovered area is too low level)
MinDiscoveredScaledXPRatio = 0
MailDeliveryDelay
Description: Time (in seconds) mail delivery is delayed when sending items.
Default: 3600 - (1 hour)
MailDeliveryDelay = 3600
CleanOldMailTime
Description: The hour at which old mails will be returned or deleted by the server.
This can be any integer number from 0 to 23. 20 will be 8pm server time.
Default: 4 - 4am
CleanOldMailTime = 4
SkillChance.Prospecting
Description: Allow skill increase from prospecting.
Default: 0 - (Disabled)
1 - (Enabled)
SkillChance.Prospecting = 0
SkillChance.Milling
Description: Allow skill increase from milling.
Default: 0 - (Disabled)
1 - (Enabled)
SkillChance.Milling = 0
OffhandCheckAtSpellUnlearn
Description: Unlearning certain spells can change offhand weapon restrictions
for equip slots.
Default: 1 - (Recheck offhand slot weapon at unlearning a spell)
0 - (Recheck offhand slot weapon only at zone update)
OffhandCheckAtSpellUnlearn = 1
ClientCacheVersion
Description: Client cache version for client cache data reset. Use any value different
from DB and not recently been used to trigger client side cache reset.
Default: 0 - (Use DB value from world DB version.cache_id field)
ClientCacheVersion = 0
Event.Announce
Description: Announce events.
Default: 0 - (Disabled)
1 - (Enabled)
Event.Announce = 0
BeepAtStart
Description: Beep when the world server finished starting.
Default: 1 - (Enabled)
0 - (Disabled)
BeepAtStart = 1
Motd
Description: Message of the Day, displayed at login. Use '@' for a newline.
Example: "Welcome to John's Server!@This server is proud to be powered by Trinity Core."
Default: "Welcome to a Trinity Core server."
Motd = "欢迎进入 巫妖王之怒 有任何问题直接联系GM"
Server.LoginInfo
Description: Display core version (.server info) on login.
Default: 0 - (Disabled)
1 - (Enabled)
Server.LoginInfo = 0
Command.LookupMaxResults
Description: Number of results being displayed using a .lookup command.
Default: 0 - (Unlimited)
Command.LookupMaxResults = 0
AllowTickets
Description: Allow/disallow sending new tickets.
Default: 1 - (Enabled)
0 - (Disabled)
AllowTickets = 1
DeletedCharacterTicketTrace
Description: Keep trace of tickets opened by deleted characters
gm_ticket.playerGuid will be 0, old GUID and character name
will be included in gm_ticket.comment
Default: 0 - (Disabled)
1 - (Enabled)
DeletedCharacterTicketTrace = 0
DungeonFinder.OptionsMask
Description: Dungeon and raid finder system.
Value is a bitmask consisting of:
LFG_OPTION_ENABLE_DUNGEON_FINDER = 1, Enable the dungeon finder browser
LFG_OPTION_ENABLE_RAID_BROWSER = 2, Enable the raid browser
Default: 1
DungeonFinder.OptionsMask = 1
DBC.EnforceItemAttributes
Description: Disallow overriding item attributes stored in DBC files with values from the
database.
Default: 1 - (Enabled, Enforce DBC values)
0 - (Disabled, Use database values)
DBC.EnforceItemAttributes = 1
AccountInstancesPerHour
Description: Controls the max amount of different instances player can enter within hour.
Default: 5
AccountInstancesPerHour = 5
Account.PasswordChangeSecurity
Description: Controls how secure the password changes are.
Default: 0 - None (Old and new password)
1 - Email (Email confirmation necessary)
2 - RBAC (RBAC enable or disables email confirmation per group)
Account.PasswordChangeSecurity = 0
BirthdayTime
Description: Set to date of project's birth in UNIX time. By default the date when
xxxxCore was started (Thu Oct 2, 2008)
Default: xxxxxxxxxx
BirthdayTime = xxxxxxxxxx
CacheDataQueries
Description: Server caches data queries at startup.
Can be disabled if not enough memory is available.
Default: 1 - (Enabled)
0 - (Disabled)
CacheDataQueries = 1
###################################################################################################
###################################################################################################
UPDATE SETTINGS
Updates.EnableDatabases
Description: A mask that describes which databases shall be updated.
Following flags are available
DATABASE_LOGIN = 1, // Auth database
DATABASE_CHARACTER = 2, // Character database
DATABASE_WORLD = 4, // World database
Default: 7 - (All enabled)
4 - (Enable world only)
0 - (All disabled)
Updates.EnableDatabases = 0
Updates.AutoSetup
Description: Auto populate empty databases.
Default: 1 - (Enabled)
0 - (Disabled)
Updates.AutoSetup = 1
Updates.Redundancy
Description: Perform data redundancy checks through hashing
to detect changes on sql updates and reapply it.
Default: 1 - (Enabled)
0 - (Disabled)
Updates.Redundancy = 1
Updates.ArchivedRedundancy
Description: Check hashes of archived updates (slows down startup).
Default: 0 - (Disabled)
1 - (Enabled)
Updates.ArchivedRedundancy = 0
Updates.AllowRehash
Description: Inserts the current file hash in the database if it is left empty.
Useful if you want to mark a file as applied but you don't know its hash.
Default: 1 - (Enabled)
0 - (Disabled)
Updates.AllowRehash = 1
Updates.CleanDeadRefMaxCount
Description: Cleans dead/ orphaned references that occur if an update was removed or renamed and edited in one step.
It only starts the clean up if the count of the missing updates is below or equal the Updates.CleanDeadRefMaxCount value.
This way prevents erasing of the update history due to wrong source directory state (maybe wrong branch or bad revision).
Disable this if you want to know if the database is in a possible "dirty state".
Default: 3 - (Enabled)
0 - (Disabled)
-1 - (Enabled - unlimited)
Updates.CleanDeadRefMaxCount = 3
###################################################################################################
###################################################################################################
HOTSWAP SETTINGS
HotSwap.Enabled (Requires compilation with DYNAMIC_LINKING=1)
Description: Enables dynamic script hotswapping.
Reloads scripts on changes.
Default: 1 - (Enabled)
0 - (Disabled)
HotSwap.Enabled = 1
HotSwap.ScriptDir
Description: Directory containing the script shared libraries (.dll/.so).
Example: "/usr/local/scripts"
Default: "scripts"
HotSwap.ScriptDir = "scripts"
HotSwap.EnableReCompiler
Description: Enables the dynamic script recompiler.
Watches your script source directories and recompiles the
script modules on changes.
Default: 1 - (Enabled)
0 - (Disabled)
HotSwap.EnableReCompiler = 1
HotSwap.EnableEarlyTermination
Description: Terminate the build of a module when an associated
source file was changed meanwhile.
Default: 1 - (Enabled)
0 - (Disabled)
HotSwap.EnableEarlyTermination = 1
HotSwap.EnableBuildFileRecreation
Description: Recreate build files when sources to a module
were added or removed.
Default: 1 - (Enabled)
0 - (Disabled)
HotSwap.EnableBuildFileRecreation = 1
HotSwap.EnableInstall
Description: Enables cmake install after automatic builds have finished
Default: 1 - (Enabled)
0 - (Disabled)
HotSwap.EnableInstall = 1
HotSwap.EnablePrefixCorrection
Description: Allows the core to automatic set the CMAKE_INSTALL_PREFIX
to it's current location in the filesystem.
Default: 1 - (Enabled)
0 - (Disabled)
HotSwap.EnablePrefixCorrection = 1
HotSwap.ReCompilerBuildType
Description: Defines the build type of the builds invoked by the recompiler.
Default: "" - Built-in build type of the module is used.
"Release" - Release builds only
"Debug" - Debug builds only
HotSwap.ReCompilerBuildType = ""
###################################################################################################
###################################################################################################
WARDEN SETTINGS
Warden.Enabled
Description: Enable Warden anticheat system.
Default: 0 - (Disabled)
1 - (Enabled)
Warden.Enabled = 0
Warden.NumMemChecks
Description: Number of Warden memory checks that are sent to the client each cycle.
Default: 3 - (Enabled)
0 - (Disabled)
Warden.NumMemChecks = 3
Warden.NumOtherChecks
Description: Number of Warden checks other than memory checks that are added to request
each checking cycle.
Default: 7 - (Enabled)
0 - (Disabled)
Warden.NumOtherChecks = 7
Warden.ClientResponseDelay
Description: Time (in seconds) before client is getting disconnecting for not responding.
Default: 600 - (10 Minutes)
0 - (Disabled, client won't be kicked)
Warden.ClientResponseDelay = 600
Warden.ClientCheckHoldOff
Description: Time (in seconds) to wait before sending the next check request to the client.
A low number increases traffic and load on client and server side.
Default: 30 - (30 Seconds)
0 - (Send check as soon as possible)
Warden.ClientCheckHoldOff = 30
Warden.ClientCheckFailAction
Description: Default action being taken if a client check failed. Actions can be
overwritten for each single check via warden_action table in characters
database.
Default: 0 - (Disabled, Logging only)
1 - (Kick)
2 - (Ban)
Warden.ClientCheckFailAction = 0
Warden.BanDuration
Description: Time (in seconds) an account will be banned if ClientCheckFailAction is set
to ban.
Default: 86400 - (24 hours)
0 - (Permanent ban)
Warden.BanDuration = 86400
