1.安装依赖包
#一键安装上面四个依赖
[root@localhost ~]# yum -y install gcc pcre-devel zlib-devel openssl openssl-devel
2.下载并解压安装包
#切换目录
[root@localhost ~]# cd /
#创建一个文件夹
[root@localhost ~]# mkdir -p www/server/nginx
#切换目录
[root@localhost ~]# cd /www/server/nginx
#下载
[root@localhost nginx]# wget http://nginx.org/download/nginx-1.21.0.tar.gz
#解压
[root@localhost nginx]# tar -xvf nginx-1.21.0.tar.gz
3.安装nginx
#进入nginx目录
[root@localhost nginx]# cd /www/server/nginx
#进入目录
[root@localhost nginx]# cd nginx-1.21.0
#执行命令
[root@localhost nginx-1.21.0]# ./configure --prefix=/usr/local/nginx
#执行make命令
[root@localhost nginx-1.21.0]# make
#执行make install命令
[root@localhost nginx-1.21.0]# make install
4.配置nginx.conf
#备份Nginx配置文件
[root@localhost conf]# cp /usr/local/nginx/conf/nginx.conf /usr/local/nginx/conf/nginx.conf.bak
#打开配置文件
[root@localhost conf]# vi /usr/local/nginx/conf/nginx.conf
将端口号改成8089，因为可能apeache占用80端口，apeache端口尽量不要修改，我们选择修改nginx端口。
localhost修改为你服务器ip地址,也可以不修改。
5.防火墙开启
i. 开启端口8089
[root@localhost conf]# firewall-cmd --zone=public --add-port=8089/tcp --permanent
ii. 重启防火墙
[root@localhost conf]# firewall-cmd --reload
iii. 查看已经开放的端口
[root@localhost conf]# firewall-cmd --list-ports
6.运行以下命令，进入Nginx的sbin目录，然后启动Nginx
[root@localhost nginx]# cd /usr/local/nginx/sbin/
[root@localhost sbin]# ./nginx
i. 安装完成一般常用命令
cd /usr/local/nginx/sbin 首先进入 sbin 目录
./nginx 启动 Nginx
./nginx -s stop 停止 Nginx
./nginx -s reload 重新加载 Nginx
./nginx -v 查看 Nginx 版本
7.查看nginx是否成功启动了
[root@localhost sbin]# ps -ef | grep nginx
root 4338 1 0 16:48 ? 00:00:00 nginx: master process ./nginx
nobody 4339 4338 0 16:48 ? 00:00:00 nginx: worker process
root 4341 1549 0 16:48 pts/0 00:00:00 grep --color=auto nginx
8.配置文件修改后，需要指定配置文件进行重启
#定配置文件进行重启
[root@localhost sbin]# /usr/local/nginx/sbin/nginx -s reload -c /usr/local/nginx/conf/nginx.conf
#检测文件是否配置正确
[root@localhost sbin]# /usr/local/nginx/sbin/nginx -t -c /usr/local/nginx/conf/nginx.conf
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
9.创建一个软链接启动nginx
#建立软链接
[root@localhost sbin]# ln -s /usr/local/nginx/sbin/nginx /usr/sbin/
#启动
[root@localhost sbin]# nginx
#查看nginx版本
[root@localhost ~]# nginx -v
nginx version: nginx/1.21.0
10.访问服务器ip+端口查看
11.配置nginx开机自启动
i. 创建一个nginx.service,按i键进入编辑模式，修改配置文件，按Esc键，然后输入:wq并按Enter键以保存
#进入目录
[root@localhost system]# cd /usr/lib/systemd/system/
#创建文件
[root@localhost system]# touch nginx.service
#编辑文件内容
[root@localhost system]# vi /usr/lib/systemd/system/nginx.service
#赋予可执行的权限
[root@localhost system]# chmod +x /usr/lib/systemd/system/nginx.service
ii. 编辑文件内容
[Unit] #对服务的说明
Description=nginx - high performance web server #描述服务
After=network.target remote-fs.target nss-lookup.target #描述服务类别
[Service] #服务的一些具体运行参数的设置
Type=forking #后台运行的形式
PIDFile= /usr/local/nginx/logs/nginx.pid #PID文件的路径
ExecStartPre=/usr/local/nginx/sbin/nginx -t -c /usr/local/nginx/conf/nginx.conf #启动准备
ExecStart=/usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf #启动命令
ExecReload=/usr/local/nginx/sbin/nginx -s reload #重启命令
ExecStop=/usr/local/nginx/sbin/nginx -s stop #停止命令
ExecQuit=/usr/local/nginx/sbin/nginx -s quit #快速停止
PrivateTmp=true #给服务分配临时空间
[Install]
WantedBy=multi-user.target #服务用户的模式
iii. 查看文件内容
[root@localhost ~]# cat /usr/lib/systemd/system/nginx.service
[Unit]
Description=nginx - high performance web server
After=network.target remote-fs.target nss-lookup.target
[Service]
Type=forking
PIDFile= /usr/local/nginx/logs/nginx.pid
ExecStartPre=/usr/local/nginx/sbin/nginx -t -c /usr/local/nginx/conf/nginx.conf
ExecStart=/usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf
ExecReload=/usr/local/nginx/sbin/nginx -s reload
ExecStop=/usr/local/nginx/sbin/nginx -s stop
ExecQuit=/usr/local/nginx/sbin/nginx -s quit
PrivateTmp=true
[Install]
WantedBy=multi-user.target
iiii. 启动服务
#在启动服务之前，需要先重载systemctl命令
[root@localhost ~]# systemctl daemon-reload
#启动服务或者使用systemctl start nginx
[root@localhost ~]# systemctl start nginx.service
#运行以下命令设置Nginx服务开机自启动
[root@localhost ~]# systemctl enable nginx
#查看nginx
[root@localhost ~]# ps -ef | grep nginx
root 14869 1 0 17:37 ? 00:00:00 nginx: master process /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf
nobody 14871 14869 0 17:37 ? 00:00:00 nginx: worker process
root 14893 1549 0 17:37 pts/0 00:00:00 grep --color=auto nginx
*配置systemctl之后的启动方式
systemctl status nginx #状态
systemctl start nginx #启动
systemctl stop nginx #停止
systemctl restart nginx #重启
iiiii. 使用reboot命令重启后，查看nginx是否成功的自启动了
[root@localhost ~]# reboot
Connection to 192.168.0.197 closed by remote host.
Connection to 192.168.0.197 closed.
C:\Users\beauty>ssh root@192.168.0.197
root@192.168.0.197's password:
Last login: Sat Jun 5 16:09:35 2021 from 192.168.0.194
[root@localhost ~]# ps -ef | grep nginx
root 1081 1 0 17:39 ? 00:00:00 nginx: master process /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf
nobody 1084 1081 0 17:39 ? 00:00:00 nginx: worker process
root 1567 1548 0 17:40 pts/0 00:00:00 grep --color=auto nginx
