手把手教Linux驱动10-platform总线详解

258 阅读9分钟

platform总线是学习linux驱动必须要掌握的一个知识点。

本文参考已发布:Linux 3.14内核

一、概念

嵌入式系统中有很多的物理总线:I2c、SPI、USB、uart、PCIE、APB、AHB

linux从2.6起就加入了一套新的驱动管理和注册的机制platform平台总线,是一条虚拟的总线,并不是一个物理的总线。

相比 PCI、USB,它主要用于描述SOC上的片上资源。platform 所描述的资源有一个共同点:在CPU 的总线上直接取址。

平台设备会分到一个名称(用在驱动绑定中)以及一系列诸如地址和中断请求号(IRQ)之类的资源。

设备用platform_device表示,驱动用platform_driver进行注册。

于传统的bus/device/driver机制相比,platform由内核进行统一管理,在驱动中使用资源,提高了代码的安全性和可移植性。

二、platform

1. platform总线两个最重要的结构体

platform维护的所有的驱动都必须要用该结构体定义:

platform_driver

struct platform_driver { int (*probe)(struct platform_device *);  // int (*remove)(struct platform_device *); void (*shutdown)(struct platform_device *); int (*suspend)(struct platform_device *, pm_message_t state); int (*resume)(struct platform_device *); struct device_driver driver; const struct platform_device_id *id_table; bool prevent_deferred_probe;};

该结构体,用于注册驱动到platform总线,

成员

含义

probe

当驱动和硬件信息匹配成功之后,就会调用probe函数,驱动所有的资源的注册和初始化全部放在probe函数中

remove

硬件信息被移除了,或者驱动被卸载了,全部要释放,释放资源的操作就放在该函数中

struct device_driver driver

内核维护的所有的驱动必须包含该成员,通常driver->name用于和设备进行匹配

const struct platform_device_id *id_table

往往一个驱动可能能同时支持多个硬件,这些硬件的名字都放在该结构体数组中

我们编写驱动的时候往往需要填充以上几个成员

platform_device

platform总线用于描述设备硬件信息的结构体,包括该硬件的所有资源(io,memory、中断、DMA等等)。

struct platform_device { const char *name; int  id; bool  id_auto; struct device dev; u32  num_resources; struct resource *resource; const struct platform_device_id *id_entry; /* MFD cell pointer */ struct mfd_cell *mfd_cell; /* arch specific additions */ struct pdev_archdata archdata;};

成员

含义

const char *name

设备的名字,用于和驱动进行匹配的

struct device dev

内核中维护的所有的设备必须包含该成员,

u32 num_resources

资源个数

struct resource *resource

描述资源

struct device dev->release()必须实现,

其中描述硬件信息的成员struct resource

0x139d0000

struct resource { resource_size_t start;  //表示资源的起始值,            resource_size_t end;    //表示资源的最后一个字节的地址, 如果是中断,end和satrt相同 const char *name;   // 可不写   unsigned long flags; //资源的类型 struct resource *parent, *sibling, *child;};flags的类型说明#define IORESOURCE_MEM  0x00000200    //内存#define IORESOURCE_IRQ  0x00000400    //中断

内核管理的所有的驱动,都必须包含一个叫struct device_driver成员, //男性 描述的硬件,必须包含struct device结构体成员。 //女性

struct device_driver { const char  *name;       struct bus_type  *bus; struct module  *owner; const char  *mod_name; /* used for built-in modules */ bool suppress_bind_attrs; /* disables bind/unbind via sysfs */ const struct of_device_id *of_match_table; const struct acpi_device_id *acpi_match_table; int (*probe) (struct device *dev); int (*remove) (struct device *dev); void (*shutdown) (struct device *dev); int (*suspend) (struct device *dev, pm_message_t state); int (*resume) (struct device *dev); const struct attribute_group **groups; const struct dev_pm_ops *pm; struct driver_private *p;};

其中:

const char  *name;

用于和硬件进行匹配。

内核描述硬件,必须包含struct device结构体成员:

struct device { struct device  *parent; struct device_private *p; struct kobject kobj; const char  *init_name; /* initial name of the device */ const struct device_type *type; struct mutex  mutex; /* mutex to synchronize calls to      * its driver.      */ struct bus_type *bus;  /* type of bus device is on */ struct device_driver *driver; /* which driver has allocated this        device */ void  *platform_data; /* Platform specific data, device        core doesn't touch it */ struct dev_pm_info power; struct dev_pm_domain *pm_domain;#ifdef CONFIG_PINCTRL struct dev_pin_info *pins;#endif#ifdef CONFIG_NUMA int  numa_node; /* NUMA node this device is close to */#endif u64  *dma_mask; /* dma mask (if dma'able device) */ u64  coherent_dma_mask;/* Like dma_mask, but for          alloc_coherent mappings as          not all hardware supports          64 bit addresses for consistent          allocations such descriptors. */ struct device_dma_parameters *dma_parms; struct list_head dma_pools; /* dma pools (if dma'ble) */ struct dma_coherent_mem *dma_mem; /* internal for coherent mem          override */#ifdef CONFIG_DMA_CMA struct cma *cma_area;  /* contiguous memory area for dma        allocations */#endif /* arch specific additions */ struct dev_archdata archdata; struct device_node *of_node; /* associated device tree node */ struct acpi_dev_node acpi_node; /* associated ACPI device node */ dev_t   devt; /* dev_t, creates the sysfs "dev" */ u32   id; /* device instance */ spinlock_t  devres_lock; struct list_head devres_head; struct klist_node knode_class; struct class  *class; const struct attribute_group **groups; /* optional groups */ void (*release)(struct device *dev); struct iommu_group *iommu_group; bool   offline_disabled:1; bool   offline:1;};

其中:

void (*release)(struct device *dev);

不能为空。

2. 如何注册

要用注册一个platform驱动的步骤

1)注册驱动platform_device_register

/** * platform_device_register - add a platform-level device * @pdev: platform device we're adding */int platform_device_register(struct platform_device *pdev){ device_initialize(&pdev->dev); arch_setup_pdev_archdata(pdev); return platform_device_add(pdev);}

2) 注册设备platform_driver_register

#define platform_driver_register(drv) \ __platform_driver_register(drv, THIS_MODULE)

三、举例

1. 开发步骤

platform 总线下驱动的开发步骤是:

设备

需要实现的结构体是:platform_device 。

1)初始化 resource 结构变量

2)初始化 platform_device 结构变量

3)向系统注册设备:platform_device_register。

以上三步,必须在设备驱动加载前完成,即执行platform_driver_register()之前,原因是驱动注册时需要匹配内核中所有已注册的设备名。

platform_driver_register()中添加device到内核最终还是调用的device_add函数。

Platform_device_add和device_add最主要的区别是多了一步insert_resource(p, r),即将platform资源(resource)添加进内核,由内核统一管理。

驱动

驱动注册中,需要实现的结构体是:platform_driver 。

在驱动程序的初始化函数中,调用了platform_driver_register()注册 platform_driver 。

需要注意的是:platform_driver 和 platform_device 中的 name 变量的值必须是相同的【在不考虑设备树情况下,关于设备树,后面会写新的文章详细讲述】 。

这样在 platform_driver_register() 注册时,会将当前注册的 platform_driver 中的 name 变量的值和已注册的所有 platform_device 中的 name 变量的值进行比较,只有找到具有相同名称的 platform_device 才能注册成功。

当注册成功时,会调用 platform_driver 结构元素 probe 函数指针。

实例1

本例比较简单,只用于测试platform_driver 和platform_device是否可以匹配成功。 左边是platform_device结构体注册的代码,右边是platform_driver结构体注册的代码。

platform_driver 定义和注册:

 1 #include <linux/init.h>  2 #include <linux/module.h>  3 #include <linux/platform_device.h>  4 #include <linux/ioport.h>  5   6 static int hello_probe(struct platform_device *pdev)  7 {  8     printk("match ok \n");  9     return 0; 10 } 11 static  int hello_remove(struct platform_device *pdev) 12 { 13     printk("hello_remove \n"); 14     return 0; 15 } 16 static struct platform_driver hello_driver = 17 { 18     .probe = hello_probe, 19     .driver.name = "duang", 20     .remove = hello_remove,      21 }; 22 static int hello_init(void) 23 { 24     printk("hello_init \n"); 25     return platform_driver_register(&hello_driver); 26 } 27 static void hello_exit(void) 28 { 29     printk("hello_exit \n"); 30     platform_driver_unregister(&hello_driver); 31     return; 32 } 33 MODULE_LICENSE("GPL"); 34 module_init(hello_init); 35 module_exit(hello_exit);

platform_device定义和注册:

  1 #include <linux/init.h>                                                                                                                                                          2 #include <linux/module.h>  3 #include <linux/platform_device.h>  4 #include <linux/ioport.h>  5   6 static void hello_release(struct device *dev)  7 {  8      return;  9 } 10 static struct platform_device hello_device = 11 { 12     .name = "duang", 13     .id = -1, 14     .dev.release = hello_release, 15 }; 16  17  18 static int hello_init(void) 19 { 20     printk("hello_init \n"); 21     return platform_device_register(&hello_device); 22  23 } 24 static void hello_exit(void) 25 { 26     printk("hello_exit \n"); 27     platform_device_unregister(&hello_device); 28     return; 29 } 30 MODULE_LICENSE("GPL"); 31 module_init(hello_init); 32 module_exit(hello_exit);

该程序只用于测试platform框架是否可以成功匹配,struct platform_device hello_device 并没有设置任何硬件信息。

Makfile

  1 ifneq ($(KERNELRELEASE),)                                                                                                                                                        2 obj-m:=device.o driver.o  3 else  4 KDIR :=/lib/modules/$(shell uname -r)/build  5 PWD  :=$(shell pwd)  6 all:  7     make -C $(KDIR) M=$(PWD) modules  8 clean:  9     rm -f *.ko *.o *.mod.o *.symvers *.cmd  *.mod.c *.order 10 endif

该makefile可以同时将两个C文件编译成ko文件。

编译:

编译 编译生成的文件:

在这里插入图片描述

在这里插入图片描述

加载模块

清空log信息
sudo dmesg -c

匹配成功

匹配成功

实例2

给结构体platform_device 增加硬件信息,并在内核中能够读取出来。 本例向结构体hello_device 增加信息如下:

  1. 基址寄存器地址0x139d0000,该地址的空间是0x4

  2. 中断号199 【注意】 实际的内核中会把外设的中断号根据HW id(通常soc厂商设备soc的时候会给每一个中断源定义好唯一的ID)计算出一个新的中断号,该中断号会被cpu所识别。

device.c

struct resource res[]={ [0] ={  .start = 0x139d0000,  .end  = 0x139d0000 + 0x3,  .flags = IORESOURCE_MEM, }, [1] ={  .start = 199,  .end  = 199,  .flags = IORESOURCE_IRQ, }, };static struct platform_device hello_device = { .name = "duang", .id = -1, .dev.release = hello_release,  .num_resources = ARRAY_SIZE(res), .resource = res,};

driver.c

static int hello_probe(struct platform_device *pdev){ printk("match ok \n"); printk("mem = %x \n",pdev->resource[0].start); printk("irq = %d \n",pdev->resource[1].start); //注册中断、申请内存 return 0;}

重新编译,卸载第一个例子的模块,并清除log:

makesudo rmmod device sudo rmmod driversudo dmesg -c

执行 由结果可知,probe函数正确读取到了硬件信息。

四、platform_device是如何管理的?

1. 没有设备树

在没有设备树的时候,以三星Cortex-A8 s5pc100为例,硬件信息放在以下位置

arch\arm\mach-s5pc100\Mach-smdkc100.carch\arm\plat-samsung\

注册platform_device platform_device定义 该数组存放了,内核启动需要初始化的硬件的信息。

2. 如果有设备树

内核会有设备初始化的完整代码,会在内核启动的时候把设备树信息解析初始化,把硬件信息初始化到对应的链表中。 在总线匹配成功后,会把硬件的信息传递给probe()函数。

四、总线相关的其他的知识点

1. 内核总线相关结构体变量

内核维护的所有的总线都需要用以下结构体注册一个变量。

struct bus_type { const char  *name; const char  *dev_name; struct device  *dev_root; struct device_attribute *dev_attrs; /* use dev_groups instead */ const struct attribute_group **bus_groups; const struct attribute_group **dev_groups; const struct attribute_group **drv_groups; int (*match)(struct device *dev, struct device_driver *drv); int (*uevent)(struct device *dev, struct kobj_uevent_env *env); int (*probe)(struct device *dev);    int (*remove)(struct device *dev); void (*shutdown)(struct device *dev); int (*online)(struct device *dev); int (*offline)(struct device *dev); int (*suspend)(struct device *dev, pm_message_t state); int (*resume)(struct device *dev); const struct dev_pm_ops *pm; struct iommu_ops *iommu_ops; struct subsys_private *p; struct lock_class_key lock_key;};

platform总线变量的定义struct bus_type platform_bus_type 定义如下:

struct bus_type platform_bus_type = { .name  = "platform", .dev_groups = platform_dev_groups, .match  = platform_match, .uevent  = platform_uevent, .pm  = &platform_dev_pm_ops,};

其中最重要的成员是**.match**。

当有设备的硬件信息注册到platform_bus_type 总线的时候,会遍历所有platform总线维护的驱动, 通过名字来匹配,如果相同,就说明硬件信息和驱动匹配,就会调用驱动的platform_driver ->probe函数,初始化驱动的所有资源,让该驱动生效。

当有设备的驱动注册到platform_bus_type 总线的时候,会遍历所有platform总线维护的硬件信息, 通过名字来匹配,如果相同,就说明硬件信息和驱动匹配,就会调用驱动的platform_driver ->probe函数,初始化驱动的所有资源,让该驱动生效。

注册位置

drivers\base\Platform.c

platform_bus_type的注册

platform_bus_type的注册

五、注册代码流程详解

捋架构的好处,就是可以帮助我们定位问题

1. match函数何时被调用到?

2. probe函数何时被调用到

以下是上述两个问题代码的调用流程:

  代码调用流程

后面我们会再详细介绍设备树。