Python 完整实现的简单遗传算法(SGA)

135

本文用Python3完整实现了简单遗传算法(SGA)
对python感兴趣的可加QQ:3145679695一起学习交流分享

Simple Genetic Alogrithm是模拟生物进化过程而提出的一种优化算法。SGA采用随机导向搜索全局最优解或者说近似全局最优解。传统的爬山算法(例如梯度下降,牛顿法)一次只优化一个解,并且对于多峰的目标函数很容易陷入局部最优解,而SGA算法一次优化一个种群(即一次优化多个解),SGA比传统的爬山算法更容易收敛到全局最优解或者近似全局最优解。

SGA基本流程如下:

1、对问题的解进行二进制编码。编码涉及精度的问题,在本例中精度delta=0.0001,根据决策变量的上下界确定对应此决策变量的染色体基因的长度(m)。假设一个决策变量x0上界为upper,下界为lower,则精度delta = (upper-lower)/2^m-1。如果已知决策变量边界和编码精度,那么可以用下面的公式确定编码决策变量x0所对应的染色体长度:

2(length-1)<(upper-lower)/delta<=2length-1

2、对染色体解码得到表现形:

解码后得到10进制的值;decoded = lower + binary2demical(chromosome)*delta。其中binary2demical为二进制转10进制的函数,在代码中有实现,chromosome是编码后的染色体。

3、确定初始种群,初始种群随机生成

4、根据解码函数得到初始种群的10进制表现型的值

5、确定适应度函数,对于求最大值最小值问题,一般适应度函数就是目标函数。根据适应度函数确定每个个体的适应度值Fi=FitnessFunction(individual);然后确定每个个体被选择的概率Pi=Fi/sum(Fi),sum(Fi)代表所有个体适应度之和。

6、根据轮盘赌选择算子,选取适应度较大的个体。一次选取一个个体,选取n次,得到新的种群population

7、确定交叉概率Pc,对上一步得到的种群进行单点交叉。每次交叉点的位置随机。

8、确定变异概率Pm,假设种群大小为10,每个个体染色体编码长度为33,则一共有330个基因位,则变异的基因位数是330

Pm。接下来,要确定是那个染色体中哪个位置的基因发生了变异。将330按照10进制序号进行编码即从0,1,2,.......229。随机从330个数中选择330

Pm个数,假设其中一个数时154,chromosomeIndex = 154/33 =4,

geneIndex = 154%33 = 22。由此确定了第154号位置的基因位于第4个染色体的第22个位置上,将此位置的基因值置反完成基本位变异操作。

9、以上步骤完成了一次迭代的所有操作。接下就是评估的过程。对变异后得到的最终的种群进行解码,利用解码值求得每个个体的适应度值,将最大的适应度值保存下来,对应的解码后的决策变量的值也保存下来。

10、根据迭代次数,假设是500次,重复执行1-9的步骤,最终得到是一个500个数值的最优适应度取值的数组以及一个500*n的决策变量取值数组(假设有n个决策变量)。从500个值中找到最优的一个(最大或者最小,根据定义的适应度函数来选择)以及对应的决策变量的取值。

对于以上流程不是很清楚的地方,在代码中有详细的注释。也可以自行查找资料补充理论。本文重点是实现

本代码实现的问题是: maxf(x1,x2) = 21.5+x1

sin(4

pi

x1)+x2

sin(20

pi

x2)

                     s.t. -3.0<=x1<=12.1

4.1<=x2<=5.8

初始种群的编码结果如下图所示:

image

image

初始种群的解码结果如下图所示:

image

image

适应度值如图所示:

image

image

轮盘赌选择后的种群如图所示;

image

image

单点交叉后的种群如图所示:

image

image

基本位变异后的种群如图所示;

image

image

最终结果如下图所示;

image

image

源代码如下;

!/usr/bin/env python

-- coding:utf-8 --

Author: wsw

简单实现SGA算法

import numpy as np
from scipy.optimize import fsolve, basinhopping
import random
import timeit

根据解的精度确定染色体(chromosome)的长度

需要根据决策变量的上下边界来确定

def getEncodedLength(delta=0.0001, boundarylist=[]):
# 每个变量的编码长度
lengths = []
for i in boundarylist:
lower = i[0]
upper = i[1]
# lamnda 代表匿名函数f(x)=0,50代表搜索的初始解
res = fsolve(lambda x: ((upper - lower) * 1 / delta) - 2 ** x - 1, 50)
length = int(np.floor(res[0]))
lengths.append(length)
return lengths
pass

随机生成初始编码种群

def getIntialPopulation(encodelength, populationSize):
# 随机化初始种群为0
chromosomes = np.zeros((populationSize, sum(encodelength)), dtype=np.uint8)
for i in range(populationSize):
chromosomes[i, :] = np.random.randint(0, 2, sum(encodelength))
# print('chromosomes shape:', chromosomes.shape)
return chromosomes

染色体解码得到表现型的解

def decodedChromosome(encodelength, chromosomes, boundarylist, delta=0.0001):
populations = chromosomes.shape[0]
variables = len(encodelength)
decodedvalues = np.zeros((populations, variables))
for k, chromosome in enumerate(chromosomes):
chromosome = chromosome.tolist()
start = 0
for index, length in enumerate(encodelength):
# 将一个染色体进行拆分,得到染色体片段
power = length - 1
# 解码得到的10进制数字
demical = 0
for i in range(start, length + start):
demical += chromosome[i] * (2 ** power)
power -= 1
lower = boundarylist[index][0]
upper = boundarylist[index][1]
decodedvalue = lower + demical * (upper - lower) / (2 ** length - 1)
decodedvalues[k, index] = decodedvalue
# 开始去下一段染色体的编码
start = length
return decodedvalues

得到个体的适应度值及每个个体被选择的累积概率

def getFitnessValue(func, chromosomesdecoded):
# 得到种群规模和决策变量的个数
population, nums = chromosomesdecoded.shape
# 初始化种群的适应度值为0
fitnessvalues = np.zeros((population, 1))
# 计算适应度值
for i in range(population):
fitnessvalues[i, 0] = func(chromosomesdecoded[i, :])
# 计算每个染色体被选择的概率
probability = fitnessvalues / np.sum(fitnessvalues)
# 得到每个染色体被选中的累积概率
cum_probability = np.cumsum(probability)
return fitnessvalues, cum_probability

新种群选择

def selectNewPopulation(chromosomes, cum_probability):
m, n = chromosomes.shape
newpopulation = np.zeros((m, n), dtype=np.uint8)
# 随机产生M个概率值
randoms = np.random.rand(m)
for i, randoma in enumerate(randoms):
logical = cum_probability >= randoma
index = np.where(logical == 1)
# index是tuple,tuple中元素是ndarray
newpopulation[i, :] = chromosomes[index[0][0], :]
return newpopulation
pass

新种群交叉

def crossover(population, Pc=0.8):
"""
:param population: 新种群
:param Pc: 交叉概率默认是0.8
:return: 交叉后得到的新种群
"""
# 根据交叉概率计算需要进行交叉的个体个数
m, n = population.shape
numbers = np.uint8(m * Pc)
# 确保进行交叉的染色体个数是偶数个
if numbers % 2 != 0:
numbers += 1
# 交叉后得到的新种群
updatepopulation = np.zeros((m, n), dtype=np.uint8)
# 产生随机索引
index = random.sample(range(m), numbers)
# 不进行交叉的染色体进行复制
for i in range(m):
if not index.contains(i):
updatepopulation[i, :] = population[i, :]
# crossover
while len(index) > 0:
a = index.pop()
b = index.pop()
# 随机产生一个交叉点
crossoverPoint = random.sample(range(1, n), 1)
crossoverPoint = crossoverPoint[0]
# one-single-point crossover
updatepopulation[a, 0:crossoverPoint] = population[a, 0:crossoverPoint]
updatepopulation[a, crossoverPoint:] = population[b, crossoverPoint:]
updatepopulation[b, 0:crossoverPoint] = population[b, 0:crossoverPoint]
updatepopulation[b, crossoverPoint:] = population[a, crossoverPoint:]
return updatepopulation
pass

染色体变异

def mutation(population, Pm=0.01):
"""
:param population: 经交叉后得到的种群
:param Pm: 变异概率默认是0.01
:return: 经变异操作后的新种群
"""
updatepopulation = np.copy(population)
m, n = population.shape
# 计算需要变异的基因个数
gene_num = np.uint8(m * n * Pm)
# 将所有的基因按照序号进行10进制编码,则共有m*n个基因
# 随机抽取gene_num个基因进行基本位变异
mutationGeneIndex = random.sample(range(0, m * n), gene_num)
# 确定每个将要变异的基因在整个染色体中的基因座(即基因的具体位置)
for gene in mutationGeneIndex:
# 确定变异基因位于第几个染色体
chromosomeIndex = gene // n
# 确定变异基因位于当前染色体的第几个基因位
geneIndex = gene % n
# mutation
if updatepopulation[chromosomeIndex, geneIndex] == 0:
updatepopulation[chromosomeIndex, geneIndex] = 1
else:
updatepopulation[chromosomeIndex, geneIndex] = 0
return updatepopulation
pass

定义适应度函数

def fitnessFunction():
return lambda x: 21.5 + x[0] * np.sin(4 * np.pi * x[0]) + x[1] * np.sin(20 * np.pi * x[1])
pass

def main(max_iter=500):
# 每次迭代得到的最优解
optimalSolutions = []
optimalValues = []
# 决策变量的取值范围
decisionVariables = [[-3.0, 12.1], [4.1, 5.8]]
# 得到染色体编码长度
lengthEncode = getEncodedLength(boundarylist=decisionVariables)
for iteration in range(max_iter):
# 得到初始种群编码
chromosomesEncoded = getIntialPopulation(lengthEncode, 10)
# 种群解码
decoded = decodedChromosome(lengthEncode, chromosomesEncoded, decisionVariables)
# 得到个体适应度值和个体的累积概率
evalvalues, cum_proba = getFitnessValue(fitnessFunction(), decoded)
# 选择新的种群
newpopulations = selectNewPopulation(chromosomesEncoded, cum_proba)
# 进行交叉操作
crossoverpopulation = crossover(newpopulations)
# mutation
mutationpopulation = mutation(crossoverpopulation)
# 将变异后的种群解码,得到每轮迭代最终的种群
final_decoded = decodedChromosome(lengthEncode, mutationpopulation, decisionVariables)
# 适应度评价
fitnessvalues, cum_individual_proba = getFitnessValue(fitnessFunction(), final_decoded)
# 搜索每次迭代的最优解,以及最优解对应的目标函数的取值
optimalValues.append(np.max(list(fitnessvalues)))
index = np.where(fitnessvalues == max(list(fitnessvalues)))
optimalSolutions.append(final_decoded[index[0][0], :])
# 搜索最优解
optimalValue = np.max(optimalValues)
optimalIndex = np.where(optimalValues == optimalValue)
optimalSolution = optimalSolutions[optimalIndex[0][0]]
return optimalSolution, optimalValue

solution, value = main()
print('最优解: x1, x2')
print(solution[0], solution[1])
print('最优目标函数值:', value)

测量运行时间

elapsedtime = timeit.timeit(stmt=main, number=1)
print('Searching Time Elapsed:(S)', elapsedtime)

对python感兴趣的可加QQ:3145679695一起学习交流分享