如何用 TensorFlow 训练聊天机器人(附github)

4,512 阅读6分钟

前言

实际工程中很少有直接用深度学习实现端对端的聊天机器人,但这里我们来看看怎么用深度学习的seq2seq模型来实现一个简易的聊天机器人。这篇文章将尝试使用TensorFlow来训练一个基于seq2seq的聊天机器人,实现根据语料库的训练让机器人回答问题。

seq2seq

关于seq2seq的机制原理可看之前的文章《深度学习的seq2seq模型》

循环神经网络

在seq2seq模型中会使用到循环神经网络,目前流行的几种循环神经网络包括RNN、LSTM和GRU。这三种循环神经网络的机制原理可看之前的文章《循环神经网络》 《LSTM神经网络》 《GRU神经网络》

训练样本集

主要是一些QA对,开放数据也很多可以下载,这里只是随便选用一小部分问题和回答,存放的格式是第一行为问题,第二行为回答,第三行又是问题,第四行为回答,以此类推。

数据预处理

要训练就肯定要将数据转成数字,可以用0到n的值来表示整个词汇,每个值表示一个单词,这里用VOCAB_SIZE来定义。还有问题的最大最小长度,回答的最大最小长度。除此之外还要定义UNK、GO、EOS和PAD符号,分别表示未知单词,比如你超过 VOCAB_SIZE范围的则认为未知单词,GO表示decoder开始的符号,EOS表示回答结束的符号,而PAD用于填充,因为所有QA对放到同个seq2seq模型中输入和输出都必须是相同的,于是就需要将较短长度的问题或回答用PAD进行填充。

limit = {
    'maxq': 10,
    'minq': 0,
    'maxa': 8,
    'mina': 3
}

UNK = 'unk'
GO = '<go>'
EOS = '<eos>'
PAD = '<pad>'
VOCAB_SIZE = 1000

按照QA长度的限制进行筛选。

def filter_data(sequences):
    filtered_q, filtered_a = [], []
    raw_data_len = len(sequences) // 2

    for i in range(0, len(sequences), 2):
        qlen, alen = len(sequences[i].split(' ')), len(sequences[i + 1].split(' '))
        if qlen >= limit['minq'] and qlen <= limit['maxq']:
            if alen >= limit['mina'] and alen <= limit['maxa']:
                filtered_q.append(sequences[i])
                filtered_a.append(sequences[i + 1])
    filt_data_len = len(filtered_q)
    filtered = int((raw_data_len - filt_data_len) * 100 / raw_data_len)
    print(str(filtered) + '% filtered from original data')

    return filtered_q, filtered_a

我们还要得到整个语料库所有单词的频率统计,还要根据频率大小统计出排名前n个频率的单词作为整个词汇,也就是前面对应的VOCAB_SIZE。另外我们还需要根据索引值得到单词的索引,还有根据单词得到对应索引值的索引。

def index_(tokenized_sentences, vocab_size):
    freq_dist = nltk.FreqDist(itertools.chain(*tokenized_sentences))
    vocab = freq_dist.most_common(vocab_size)
    index2word = [GO] + [EOS] + [UNK] + [PAD] + [x[0] for x in vocab]
    word2index = dict([(w, i) for i, w in enumerate(index2word)])
    return index2word, word2index, freq_dist

前面也说到在我们的seq2seq模型中,对于encoder来说,问题的长短是不同的,那么不够长的要用PAD进行填充,比如问题为"how are you",假如长度定为10,则需要将其填充为"how are you pad pad pad pad pad pad pad"。对于decoder来说,要以GO开始,以EOS结尾,不够长还得填充,比如"fine thank you",则要处理成"go fine thank you eos pad pad pad pad pad "。第三个要处理的则是我们的target,target其实和decoder的输入是相同的,只不过它刚好有一个位置的偏移,比如上面要去掉go,变成"fine thank you eos pad pad pad pad pad pad"。

def zero_pad(qtokenized, atokenized, w2idx):
    data_len = len(qtokenized)
    # +2 dues to '<go>' and '<eos>'
    idx_q = np.zeros([data_len, limit['maxq']], dtype=np.int32)
    idx_a = np.zeros([data_len, limit['maxa'] + 2], dtype=np.int32)
    idx_o = np.zeros([data_len, limit['maxa'] + 2], dtype=np.int32)

    for i in range(data_len):
        q_indices = pad_seq(qtokenized[i], w2idx, limit['maxq'], 1)
        a_indices = pad_seq(atokenized[i], w2idx, limit['maxa'], 2)
        o_indices = pad_seq(atokenized[i], w2idx, limit['maxa'], 3)
        idx_q[i] = np.array(q_indices)
        idx_a[i] = np.array(a_indices)
        idx_o[i] = np.array(o_indices)

    return idx_q, idx_a, idx_o


def pad_seq(seq, lookup, maxlen, flag):
    if flag == 1:
        indices = []
    elif flag == 2:
        indices = [lookup[GO]]
    elif flag == 3:
        indices = []
    for word in seq:
        if word in lookup:
            indices.append(lookup[word])
        else:
            indices.append(lookup[UNK])
    if flag == 1:
        return indices + [lookup[PAD]] * (maxlen - len(seq))
    elif flag == 2:
        return indices + [lookup[EOS]] + [lookup[PAD]] * (maxlen - len(seq))
    elif flag == 3:
        return indices + [lookup[EOS]] + [lookup[PAD]] * (maxlen - len(seq) + 1)

然后将上面处理后的结构都持久化起来,供训练时使用。

构建图

encoder_inputs = tf.placeholder(dtype=tf.int32, shape=[batch_size, sequence_length])
decoder_inputs = tf.placeholder(dtype=tf.int32, shape=[batch_size, sequence_length])
targets = tf.placeholder(dtype=tf.int32, shape=[batch_size, sequence_length])
weights = tf.placeholder(dtype=tf.float32, shape=[batch_size, sequence_length])

创建四个占位符,分别为encoder的输入占位符、decoder的输入占位符和decoder的target占位符,还有权重占位符。其中batch_size是输入样本一批的数量,sequence_length为我们定义的序列的长度。

cell = tf.nn.rnn_cell.BasicLSTMCell(hidden_size)
cell = tf.nn.rnn_cell.MultiRNNCell([cell] * num_layers)

创建循环神经网络结构,这里使用LSTM结构,hidden_size是隐含层数量,用MultiRNNCell是因为我们希望创建一个更复杂的网络,num_layers为LSTM的层数。

results, states = tf.contrib.legacy_seq2seq.embedding_rnn_seq2seq(
    tf.unstack(encoder_inputs, axis=1),
    tf.unstack(decoder_inputs, axis=1),
    cell,
    num_encoder_symbols,
    num_decoder_symbols,
    embedding_size,
    feed_previous=False
)

使用TensorFlow为我们准备好了的embedding_rnn_seq2seq函数搭建seq2seq结构,当然我们也可以自己从LSTM搭起,分别创建encoder和decoder,但为了方便直接使用embedding_rnn_seq2seq即可。使用tf.unstack函数是为了将encoder_inputs和decoder_inputs展开成一个列表,num_encoder_symbols和num_decoder_symbols对应到我们的词汇数量。embedding_size则是我们的嵌入层的数量,feed_previous这个变量很重要,设为False表示这是训练阶段,训练阶段会使用decoder_inputs作为decoder的其中一个输入,但feed_previous为True时则表示预测阶段,而预测阶段没有decoder_inputs,所以只能依靠decoder上一时刻输出作为当前时刻的输入。

logits = tf.stack(results, axis=1)
loss = tf.contrib.seq2seq.sequence_loss(logits, targets=targets, weights=weights)
pred = tf.argmax(logits, axis=2)
train_op = tf.train.AdamOptimizer(learning_rate=learning_rate).minimize(loss)

接着使用sequence_loss来创建损失,这里根据embedding_rnn_seq2seq的输出来计算损失,同时该输出也可以用来做预测,最大的值对应的索引即为词汇的单词,优化器使用的事AdamOptimizer。

创建会话

with tf.Session() as sess:
    ckpt = tf.train.get_checkpoint_state(model_dir)
    if ckpt and ckpt.model_checkpoint_path:
        saver.restore(sess, ckpt.model_checkpoint_path)
    else:
        sess.run(tf.global_variables_initializer())
    epoch = 0
    while epoch < 5000000:
        epoch = epoch + 1
        print("epoch:", epoch)
        for step in range(0, 1):
            print("step:", step)
            train_x, train_y, train_target = loadQA()
            train_encoder_inputs = train_x[step * batch_size:step * batch_size + batch_size, :]
            train_decoder_inputs = train_y[step * batch_size:step * batch_size + batch_size, :]
            train_targets = train_target[step * batch_size:step * batch_size + batch_size, :]
            op = sess.run(train_op, feed_dict={encoder_inputs: train_encoder_inputs, targets: train_targets,
                                               weights: train_weights, decoder_inputs: train_decoder_inputs})
            cost = sess.run(loss, feed_dict={encoder_inputs: train_encoder_inputs, targets: train_targets,
                                             weights: train_weights, decoder_inputs: train_decoder_inputs})
            print(cost)
            step = step + 1
        if epoch % 100 == 0:
            saver.save(sess, model_dir + '/model.ckpt', global_step=epoch + 1)

创建会话开始执行,这里会用到tf.train.Saver对象来保存和读取模型,保险起见可以每隔一定间隔保存一次模型,下次重启会接着训练而不用从头重新来过,这里因为是一个例子,QA对数量不多,所以直接一次性当成一批送进去训练,而并没有分成多批。

预测

with tf.device('/cpu:0'):
    batch_size = 1
    sequence_length = 10
    num_encoder_symbols = 1004
    num_decoder_symbols = 1004
    embedding_size = 256
    hidden_size = 256
    num_layers = 2

    encoder_inputs = tf.placeholder(dtype=tf.int32, shape=[batch_size, sequence_length])
    decoder_inputs = tf.placeholder(dtype=tf.int32, shape=[batch_size, sequence_length])

    targets = tf.placeholder(dtype=tf.int32, shape=[batch_size, sequence_length])
    weights = tf.placeholder(dtype=tf.float32, shape=[batch_size, sequence_length])

    cell = tf.nn.rnn_cell.BasicLSTMCell(hidden_size)
    cell = tf.nn.rnn_cell.MultiRNNCell([cell] * num_layers)

    results, states = tf.contrib.legacy_seq2seq.embedding_rnn_seq2seq(
        tf.unstack(encoder_inputs, axis=1),
        tf.unstack(decoder_inputs, axis=1),
        cell,
        num_encoder_symbols,
        num_decoder_symbols,
        embedding_size,
        feed_previous=True,
    )
    logits = tf.stack(results, axis=1)
    pred = tf.argmax(logits, axis=2)

    saver = tf.train.Saver()
    with tf.Session() as sess:
        module_file = tf.train.latest_checkpoint('./model/')
        saver.restore(sess, module_file)
        map = Word_Id_Map()
        encoder_input = map.sentence2ids(['you', 'want', 'to', 'turn', 'twitter', 'followers', 'into', 'blog', 'readers'])

        encoder_input = encoder_input + [3 for i in range(0, 10 - len(encoder_input))]
        encoder_input = np.asarray([np.asarray(encoder_input)])
        decoder_input = np.zeros([1, 10])
        print('encoder_input : ', encoder_input)
        print('decoder_input : ', decoder_input)
        pred_value = sess.run(pred, feed_dict={encoder_inputs: encoder_input, decoder_inputs: decoder_input})
        print(pred_value)
        sentence = map.ids2sentence(pred_value[0])
        print(sentence)

预测阶段也同样要创建相同的模型,然后将训练时保存的模型加载进来,然后实现对问题的回答的预测。预测阶段我们用cpu来执行就行了,避免使用GPU。创建图的步骤和训练时基本一致,参数也要保持一致,不同的地方在于我们要将embedding_rnn_seq2seq函数的feed_previous参数设为True,因为我们已经没有decoder输入了。另外我们也不需要损失函数和优化器,仅仅提供预测函数即可。

创建会话后开始执行,先加载model目录下的模型,然后再将待测试的问题转成向量形式,接着进行预测,得到输出如下:
['how', 'do', 'you', 'do', 'this', '', '', '', '', '']。

github

github.com/sea-boat/se…

以下是广告相关阅读

========广告时间========

鄙人的新书《Tomcat内核设计剖析》已经在京东销售了,有需要的朋友可以到 item.jd.com/12185360.ht… 进行预定。感谢各位朋友。

为什么写《Tomcat内核设计剖析》

=========================

相关阅读:

《LSTM神经网络》

《循环神经网络》

《深度学习的seq2seq模型》

《机器学习之神经网络》

《GRU神经网络》

欢迎关注:

这里写图片描述
这里写图片描述